Super Fast Email Support
Home > Products > Vision and Airflow Roller Shutters > Punched Roller Shutters > GLV-11PU Punched Steel Roller Shutters
The curtain is constructed from galvanised continuously interlocked steel laths that are securely held in place by end locks. A number of thicknesses and profiles are available according to individual circumstances such as size, wind loading etc. Bottom rails are generally galvanised and roll-formed into a tee section.
Vertical guides are formed from rolled steel or fabricated dependent on size and are supplied with appropriate angles for fixing to the structure.
Mild steel of appropriate thickness in relation to door thickness is prime painted and supplied with angles for fixing to he structure.
Our barrels are normally made from a seamless steel tube of adequate diameter to counteract deflection and hold in bearings or cups attached to the end plates.
Comes galvanised with non-galvanised parts prime painted as standard. Can be powder coated to any standard RAL/BS colour for a surcharge.
Shutters over smaller openings are typically powered by a 240-volt single phase tubular motor whereas larger shutters are operated using a 400-volt 3 phase geared motor. Adjustable limit switches are incorporated to stop the shutter at the end of each travel.
Standard controls include open/close/stop buttons for geared motors and rocker switches on single phase tubular motors.
(Not all options are available on all size shutters)
Loop and Radar operation
Swipe Card activation
Spring and lock operation (for smaller shutters)
Hand chain operation for larger shutters
A number of lath designs are available from 51mm flat lath for smaller openings to 76mm curved and 102mm flat laths for exposed and industrial locations. The laths can be perforated or punched to allow ventilation and/or provide visibility into the premises whilst maintaining the required security.
Can be Polyester powder coated or plastisol coated in a range of standard RAL colours’ for an extra charge.
We have several resources available for architects including CAD drawings and detailed
There are three main methods for fixing your shutter to the aperture. Use our measuring guide
to obtain the most accurate quote.
If you have any questions please get in touch by filling out the form or get in touch via. the information below
Please upload .jpg or .png files only. Maximum file size 3MB:
Copyright © 2020 UK Roller Shutters Limited. All Rights Reserved. Company No. 08873267. Unit 41, Wombourne Enterprise Park, Bridgnorth Road, Wombourne, WV5 0AL