Fast Action Steel Shutter

E-Speed Dual Door Model

Fast Action Steel Shutter
rapid_1.jpgE speed 1.jpgE speed 2.jpg

Fast Action Steel Shutter

E-Speed Dual Door Model

  • Product Description
  • Key Features
  • Ideal Uses
  • Technical Specifications
  • Options and variations
  • Downloads
  • Watch the Video
Our fast action E-Speed model of roller shutter, often dubbed our “dual door”, does the job of two roller shutters offering both security and insulation, with speed and convenience.
Made from lightweight, insulated steel and wired up to a clever control panel enables this roller shutter to travel up to maximum speeds of 1000mm/second.
Typically these shutters might be used in areas concerned about climate control and/or hygiene such as car garages or food factories. Because of their security properties and rapid closing nature, they can also be used in areas needed to close down quickly such as banks or book keepers
  • Made from insulated steel
  • Can move up to 1000mm/second dependent on application and size
  • Can be powder coated any RAL colour
  • Can be operated using a number of control options and trigger methods.
  • Car garages
  • Food Factories
  • Banks
  • Book Keepers

SHUTTER CURTAIN

Constructed from pre-galvanised material. Ecotech formula foam infill – CFC free/ODP zero with a low global warming overall ‘U’ value of 4.8 W/m2 K. Each panel section is 94mm deep with multi-ribbed face for rigidity.

END LOCKS

The curtain, when assembled is held in position with purposely-designed injection moulded end fittings, manufactured from hardwearing nylon-6, which sits on the outside of the panels minimising scuffing and damage.

BOTTOM SEAL

The bottom panel of the shutter is terminated with a specially designed aluminium extruded section complete with interlocking (EPDM) rubber weather seal.

BARREL

Manufactured from seamless mild steel tube to BS4760 Grade 50C. Size to suit door width and height. Maximum barrel deflection 1:400. Fitted with precision-machined BDMS axles to BS970 EN33.

MAIN SUPPORT BRACKETS

The main support brackets for the barrel and motor unit are manufactured from mild steel plates of varying thickness and incorporate the necessary fixing positions for securing back to the opening structure.

VERTICAL SIDE GUIDES

Formed from pre-galvanised material having a minimum thickness of 2.5mm incorporating twin vertical brushes on both inner and outer face of the guide. Brush carrier is constructed from PVC of medium impact strength, finished black and incorporating twin siliconised polypropylene weather strips, these running the full height of the door guide. The guide form is designed to allow reduced working faces and tapered inner faces to provide automatic interlocking/retaining feature for performance of retention under wind load. Complete with continuous 100 x 65 galvanised fixing angle.

OPERATION

Operation via Safedrive® Fi Drive unit with built-on frequency inverter with high precision worm drive gear box with integral safety brake system to British and European standards for industrial doors BS 12604:2002. Mechanical aspects and BS 12453:2001 safety in use of power operated doors. Drives are designed fora typical door size to have a life of more than 20,000 cycles and for use up to 6 times per hour. The drive is fitted with low level manual operation in accordance with EN 12453 and 12604 hand force up to 390N is permissible for large, heavy doors. Manual operation is only used for closing the door. In case of Safedrive® units fitted with electric brakes, manual operation is carries out against the brake.

Fascia’s

Galvanised steel hoods can be supplied to cover the coiled shutter and motor.

Operation/Controls

Electric

(Not all options are available on all size shutters)

Key switch

Radio/remote Control

Rocker switch

Timer closing

Loop and Radar operation

Smart phone

Swipe Card activation Manual

Finishes

Can be Polyester powder coated or plastisol coated in a range of standard RAL colours’ for an extra charge.

Contact Us regarding our Fast Action Steel Shutter Today

ARCHITECT? USE OUR ARCHITECT TOOLS…

We have several resources available for architects including CAD drawings and detailed product information.

Resources

HAVING TROUBLE MEASURING?

There are three main methods for fixing your shutter to the aperture. Use our measuring guide to obtain the most accurate quote.

MEASURING GUIDE

Quick Enquiry

Please fill in the form below to get an accurate quote for this product . If you have any questions please get in touch with our team on +44 (0) 1384 221743.

  • Enter your aperture width x height in mm. For multiple apertures separate with a comma e.g. 1000x2000, 2000x1000
  • Accepted file types: jpg, png.
    Please upload .jpg or .png files only. Maximum file size: 3MB
  • This field is for validation purposes and should be left unchanged.

Coming soon, our smartphone app...

Out and about? Our new app will allow you to measure apertures for our roller shutters.

Coming soon, our smartphone app...