ALU-1237 Solid Aluminium Security Roller Shutter

ALU-1237

ALU-1237 Solid Aluminium Security Shutter
alu_secure_6.jpgalu_secure_3.jpgalu_secure_5.jpgalu_secure_4.jpgthumb_IMG_4765_1024.jpg2016_11_20 15.56.06.jpgblack ali.jpg

ALU-1237 Solid Aluminium Security Roller Shutter

ALU-1237

  • Product Description
  • Ideal Uses
  • Key Features
  • Technical Specifications
  • Options and variations
  • Watch the Video
  • Downloads (.dwg files, NBS spec, CAD drawings)
The ALU-1237 is often used on residential and commercial buildings where security is the primary concern. This is because it has a very aesthetically pleasing design and it is also made using an extruded profile, giving it greater strength and stability over regular lath.
Furthermore, this model of shutter can be upgraded, for a surcharge, in order to achieve a higher security rating – Secured by Design LPS1175 SR1 (see accreditations explained on our website).
Although not insulated, this product in its basic form offers a more secure way of covering your apertures than the ALU12-M411. These roller shutters can come perforated or punched if required (see punched and perforated sections) and come white or brown as standard, but can be powder coated to any stocked RAL/BS colour for a surcharge.
This particular model caters to smaller openings and domestic properties.
You would generally see this used in:
  • Office doors & windows
  • Bars
  • Reception counters
  • Display areas
  • Shop fronts
  • Domestic properties
  • Garage doors
  • Van & Vehicle shutters
  • Large range of Aluminum shutters that offer a secure and weatherproof solution to safeguarding large or small openings.
  • Traditionally gives a better cosmetic appearance to that of a steel shutter.
  • Much lighter than a steel shutter so less energy is required to open them.
  • Powder coated White or Brown as standard. Can be powder coated to any standard RAL/BS colour for an additional charge.
  • Options for Vision & Airflow using Punched or Perforated lath.

Applications

Domestic and commercial sites, up to 12m². Our ALU-1237 is ideal for window openings and pedestrian door entrances, either internally or externally mounted with a face or reveal fit.
Note: The ALU-1237 can be upgraded to insurance approved, Secure by Design status – LPS1175 SR1. 
Punched or Perforated profile slats can be incorporated as required for full or partial vision. Can have poly-carbonate inserts to infill the punched section.

Curtain Slat

Double-skinned extruded aluminium.
Blind Surface: 37.5mm
Weight per m²: 7.9kg
Maximum width: 4000mm
Maximum surface: 9m² (Manual operation)
                                12m² (Electric operation)

Enclosure

Manufactured using roll-formed aluminium with pressure-moulded aluminium end plates.
Circular box available for 165mm/205mm plates for an additional cost.
Guide Height (mm)  Plate size (mm)
1050                           150
1535                           165
1820                           180
2795                           205
3550                           250
4700                           300
Plate sizes shown as a guide only and may vary.

Guide Channels / Bottom Slat

Extruded aluminium bottom slat with weather seal.
Extruded aluminium guide channels with brush inserts. 45mm, 53mm, 60mm HD or 66mm depths available as required. Self-packing and circular surface guides available on request.

Finish

Standard colours: White (RAL 9016) or Brown (RAL 8019) as standard. Can be powder coated to any stock RAL/BS colour for an additional cost.

Operation

Cord Belt: A swivel winder coils a belt attached to the rotating shutter barrel.
Rod & Crank: Geared rod and crank handle winds the shutter.
Spring & Lock: A counter balanced spring assembly with a key lock bottom slat & handles.
Electric: Single phase tubular motor & wall switch as standard. Numerous options such as group or remote control etc. Manual override facility as required (surcharge applies).

Operation/Controls

Electric

(Not all options are available on all size shutters)

Key switch

Radio/remote Control 

Rocker switch

Timer closing

Loop and Radar operation

Smart phone

Swipe Card activation

Manual

Spring and lock operation (for smaller shutters)

Cord operation (for smaller shutters)

Lath Design

The lath can be perforated or punched to allow ventilation and/or provide visibility into the premises whilst maintaining the required security. Poly-carbonate inserts can be included for Punched model for an additional cost if required.

Finishes

Can be Polyester powder coated or plastisol coated in a range of standard RAL colours’ for an extra charge. 

Accreditations

All of our security shutters guarantee a high level of security against vandalism and theft. However, for an extra charge you can have one of our shutters with a distinct security or fire rating accreditation including SBD (Secured by Design) or LPS 1175 security rated levels 1-4.

ARCHITECT? USE OUR ARCHITECT TOOLS…

We have several resources available for architects including CAD drawings and detailed product information.

Resources

HAVING TROUBLE MEASURING?

There are three main methods for fixing your shutter to the aperture. Use our measuring guide to obtain the most accurate quote.

MEASURING GUIDE

Quick Enquiry

Please fill in the form below to get an accurate quote for this product . If you have any questions please get in touch with our team on +44 (0) 1384 221743.

  • Enter your aperture width x height in mm. For multiple apertures separate with a comma e.g. 1000x2000, 2000x1000
  • Accepted file types: jpg, png.
    Please upload .jpg or .png files only. Maximum file size: 3MB
  • This field is for validation purposes and should be left unchanged.

Coming soon, our smartphone app...

Out and about? Our new app will allow you to measure apertures for our roller shutters.

Coming soon, our smartphone app...