Technical Support
Super Fast Email Support
Home > Products > Aluminium Roller Shutters > ALU-1237 Solid Aluminium Security Roller Shutter
ALU-1237
Domestic and commercial sites, up to 12m². Our ALU-1237 is ideal for window openings and pedestrian door entrances, either internally or externally mounted with a face or reveal fit.Note: The ALU-1237 can be upgraded to insurance approved, Secure by Design status – LPS1175 SR1. Punched or Perforated profile slats can be incorporated as required for full or partial vision. Can have poly-carbonate inserts to infill the punched section.
Double-skinned extruded aluminium.Blind Surface: 37.5mmWeight per m²: 7.9kgMaximum width: 4000mmMaximum surface: 9m² (Manual operation) 12m² (Electric operation)
Manufactured using roll-formed aluminium with pressure-moulded aluminium end plates.Circular box available for 165mm/205mm plates for an additional cost.Guide Height (mm) Plate size (mm)1050 1501535 1651820 1802795 2053550 2504700 300Plate sizes shown as a guide only and may vary.
Extruded aluminium bottom slat with weather seal.Extruded aluminium guide channels with brush inserts. 45mm, 53mm, 60mm HD or 66mm depths available as required. Self-packing and circular surface guides available on request.
Standard colours: White (RAL 9016) or Brown (RAL 8019) as standard. Can be powder coated to any stock RAL/BS colour for an additional cost.
Cord Belt: A swivel winder coils a belt attached to the rotating shutter barrel.Rod & Crank: Geared rod and crank handle winds the shutter.Spring & Lock: A counter balanced spring assembly with a key lock bottom slat & handles.Electric: Single phase tubular motor & wall switch as standard. Numerous options such as group or remote control etc. Manual override facility as required (surcharge applies).
Electric
(Not all options are available on all size shutters)
Key switch
Radio/remote Control
Rocker switch
Timer closing
Loop and Radar operation
Smart phone
Swipe Card activation
Manual
Spring and lock operation (for smaller shutters)
Cord operation (for smaller shutters)
The lath can be perforated or punched to allow ventilation and/or provide visibility into the premises whilst maintaining the required security. Poly-carbonate inserts can be included for Punched model for an additional cost if required.
Can be Polyester powder coated or plastisol coated in a range of standard RAL colours’ for an extra charge.
All of our security shutters guarantee a high level of security against vandalism and theft. However, for an extra charge you can have one of our shutters with a distinct security or fire rating accreditation including SBD (Secured by Design) or LPS 1175 security rated levels 1-4.
We have several resources available for architects including CAD drawings and detailed product information.
There are three main methods for fixing your shutter to the aperture. Use our measuring guide to obtain the most accurate quote.
If you have any questions please get in touch by filling out the form or get in touch via. the information below
Please upload .jpg or .png files only. Maximum file size 3MB: